1) On heavy fabric 16oz+ my jetting always end up fatter in the middle [pic below] than the edges no matter how careful I am. Should I trim the cut edge back 1/8th before turning?
2) What is the procedure for canvasing around s cross ticket pocket about a main cross pocket - do I cut 2 slots in the canvas? Or a large hole? Or does only the large cross pocket go through the canvas?
![](https://static.wixstatic.com/media/603af2_1a9728c34d314fcda271bd0bd9658057~mv2.jpg/v1/fill/w_980,h_735,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/603af2_1a9728c34d314fcda271bd0bd9658057~mv2.jpg)
![](https://static.wixstatic.com/media/603af2_b89fc7882aad4772bcf2bc5697dd480b~mv2.jpg/v1/fill/w_980,h_1307,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/603af2_b89fc7882aad4772bcf2bc5697dd480b~mv2.jpg)
The ticket pocket should have its own opening in the canvas just like the cross pocket
I have this problem too.
Its easier to just make the pocket mouth wider. I typically aim for about 3/16th jet on normal light weight cloth and 3/8th jet on a heavy weight.